Pharmaceutical and FMCG industries often use the words Mapping study and Qualification study interchangeably. However, there is a slight difference in the scope of work which we explain as below.
What is Temperature Qualification study? (or Temperature & Humidity Qualification study)
Temperature qualification study is a very detailed sequence of tests and analysis. These ensure that the asset is designed and installed in such a way that it is capable of maintaining the desired temperature. After these series of test and verification, the asset is certified to be qualified. This means it is qualified for achieving and maintaining the desired levels of temperature and humidity levels. The various tests under the qualification process, in general, are as under:
- Design qualification process to verify the design aspects. This process verifies that the design of equipment is suitable to generate the desired temperature and humidity conditions.
- Installation qualification process is for verification of the installation of the equipment. This ensures whether the installation is carried out as per the design and as per the installation procedures recommended. The respective manufacturers of critical equipment issue such installation process.
- Operation qualification process is to verify that the operations are carried out as per the recommended procedures of the manufacturers of the critical equipment
- Document verification is to verify whether all documents are maintained by the user including SOP, calibration certificates etc.
- Temperature mapping study (and Humidity if required) is more or less same as defined in the first part of the guide.
Difference between Temperature mapping study and Temperature qualification study
In a temperature mapping study, only distribution of temperature & humidity is analyzed. This study makes sure that the distribution is always within the permitted range of temperature and humidity as applicable. However the mapping study does not check various criteria such as SOP, whether the installation has been done correctly, whether the machines are working as per the design, whether written procedures are maintained, whether these written procedures are sufficient etc. All such parameters are covered in a temperature qualification study.
A temperature qualification study includes mapping study, but not vice versa.
How to decide whether you need Temperature Mapping study or Temperature Qualification Study?
If you want to check the only distribution of temperature & humidity, a mapping study is sufficient. If you want to check whether the whole asset is designed, installed and operated correctly, it is desirable to carry out a temperature qualification study.
A qualification study is considered to more of international acceptance. An auditor from another part of the world may not be familiar with the various installation and operational parameters of the asset. If an asset is qualified the asset is considered to be a fully satisfactory system.
Please click to see our Main Pages:
Related articles on Temperature mapping study
- Temperature mapping study and validation
- Guide on Temperature mapping study & Qualification
- Reasons for failure of mapping study of a cold room
- Top 10 Checklist for Temperature & Humidity Mapping, Validation & Qualification of cold room, vehicle, warehouse, refrigerator
- Temperature Mapping Study – Pharmaceutical industry
- Temperature Mapping & Qualification of Vehicles, Refrigerator, Cold Room, Ware house, Reefer
Vacker Arabia supplies product and services related to temperature mapping, validation and qualification in all cities of Saudi Arabia covering Jeddah, Dammam, Riyadh, Jubail and Khobar.